Water Purifiers Manufacturers

Although chlorine is the most popular and most used among pool chemicals in keeping the pool water intact and clean at all times, the negative effect it has on the medical condition of swimmers should be put into account and careful consideration. Most of the pool related cases where the bathers suffer medical conditions due to the side effects of chemical products, chlorine remains to be on top of the list responsible for most of these health problems.

Medical studies point out the negative effects on the use of chlorine and its counterparts in affecting not only the outward physical condition of the bathers, but also the inside of the human body. Most of these researches were conducted on previously healthy patients who suffered not only mild skin irritation, burning feeling in their eyes, and the difficulty in breathing, but also had abnormality in their immune system. Fertility is also greatly affected when prolonged exposed to any type of pool chemical as these have byproducts that are hazardous to humans. 

For this reason, natural pool chemicals were developed in order to minimize the risk of getting these medical problems without sacrificing the fun of bathing on swimming pools. UV water filtration system and ionization pool system are two of the many alternative methods of disinfecting pool water without using chlorine or other pool chemicals. Both of these are good RO Water dispensers Suppliers in getting rid of fungi, bacteria, germs, and harmful microorganisms which are all disease causing living microorganisms constantly present on pool water. 

Depending on your preference, you can purchase either ionization pool system or UV water filtration system in exchange for your chlorine pool system that most traditional pool water system follows. 

UV water filtration system is a natural pool cleaning system in a way where the pool water is exposed to the UV light which eliminates harmful elements in the water as it passes through the filter of your UV system. This new technology uses light instead of chemicals which is far better and safer than chlorine or any other chemical products used on pools. 

Ionization is the process where ions of copper, zinc or silver or a combination of these ions are used in order to sanitize the water of your swimming pool. Instead of using chlorine, you set up electrodes in your pool which creates ions that see through the maintenance of your pool water. These poles are changed when needed in order to perform their disinfecting duties at their best. Similar with UV water filtration system, this type of natural pool cleaning system is safe to use and has no chemical side effects as compared to chlorine. 

Set up your preferred system by following the instructions or hiring a professional to do the job for you if you are hesitant in doing it on your own. Don't forget to test your pool water pH and its alkalinity level before you switch on your new pool system. When all is set you can turn on your new disinfecting system and let it run for hours or as much as required on the manual.

Oxidation is a popular alternative method of sanitizing any type of swimming pool in a natural way. Although it does not totally remove the use of chlorine or other chemical products used for disinfecting pool waters, this natural method is safer than the traditional one. 

Most swimmers are familiar with the mild side effects from most chemical products. These includes the most notable of all these which is the skin irritations caused by the reaction of the chemical on the skin of the bather. Individuals with sensitive skin should avoid bathing too much on the pool water that uses chemical products as these can cause serious problems on their skin condition.  However, too much exposure to these chemicals will mean a serious threat to the medical condition of the bather. Studies all over the world have shown the significant abnormality on the immune system of a person who is spending time swimming on a chlorinated pool on a regular basis. Experts believe that cancer can also be acquired through constant contact with chemicals that are mixed on the water of a pool. Aside from cancer and the abnormality on the immunity of a bather, chemicals greatly affect their fertility. 

However, due to the new innovations in pool system and pool care, oxidation has been developed to lower the consumption of chemical products used on most swimming pools. Oxidation is the process of using oxygen to clean and sanitize the water of swimming pools. Unlike chlorinated pools that emit foul caustic odor around the pool area and leave a burning sensation in the eyes, most oxygenated pools are odorless and are not irritating to the eyes. Oxygen not only helps in keeping the water safe for swimming, it also improves its quality which in return cuts the need for frequently adding up water on your pool. This natural method also increases the capability of your filtration system. 

Another great benefit a pool owner can get from oxidation is the significant reduction on the use of chemical products which in return gives the owner enough money to stash in the bank. Pool experts note the large saving from 40 to more than 60% reduction in pool maintenance using chlorine or other chemical products to keep the water clean Wholesale Water Purifier Suppliers and clear. Although it is fairly expensive when setting up as compared to traditional pool types, when viewed in the long run, basically it ends up much cheaper as compared to the conventional swimming pools.  

Unlike with a chlorinated pool that uses chemicals such as chlorine to get rid of germs, bacteria, as well as harmful microorganisms such as protozoa, oxidation in swimming pools kills all of these without the harmful side effects on humans. Not only is it effective in sanitizing the pool water, it also works best in destroying oil buildups and clogs on the surface of the pool from lotions and sunscreen products. It is also good against algae buildups, yeast, fungus and spores that are occasionally attacking your pool all year round. Oxidation simply works magic on any type of swimming pool without giving you worries at all.

Pool owners tend to be ignorant sometimes. I know, it's harsh to read that statement but it is true. We all know that any form of ignorance on anything is bound to crash and burn right? Yeah well, it is the same thing with pool maintenance. Each step in pool maintenance is crucial to keep one's pool in healthy shape. Yup, no step should be skipped and ignored for the whole balance would be disrupted. It sounds so serious I know. But it is true. Let's check out this pool maintenance check list. Have you skipped out a step lately? Well, let's see how you do.

- DAILY POOL MAINTENANCE

- Fishing out pool debris either small or big with either deep or shallow skimmer net. It really depends where or on what your going to use it?

- Scrubbing your pool floors, surfaces and floors with a hard bristled brush.

- Vacuuming the debris and crud suspended on the pool's platform.

- Leave your filter running over night. Ideally, your filter should run for 24 hours a day.

- Leave your pool cleaner running in the pool overnight.

- Test if pool chemicals are in their right and safe levels by using quality water test strips and kits.

- Adjusting your pool chemicals according to your readings.

- Lightly cleaning your pool equipment and accessories.

- If you could, cover your pool on Water Purifiers Manufacturers a daily basis to prevent elements and filth from getting in it.

- WEEKLY POOL MAINTENANCE

- Carry out with the pool's daily routine cleaning.

- Now is the best time to apply water shock to your pool. Usually, 2 bags of water shock is due to moderate sized pools. And 3 for the big ones.

- The time has come again to kill those algae. Put in a bottle's worth of algaecide in your pool.

- Brush the pool's walls and surfaces with a stainless steel bristled brush to destroy possible algal blooms.

- Run your filter for 2 to 3 days straight.

- Backwash your filter for about 5 minutes to get rid of dirt and debris.

- Rest your filter of 8 hours on each day of the weekend. Honey, they are just machines, they need rest too. You know what they say, all work and no REST makes a filter dull. Oh ok, that one's made up.

- MONTHLY POOL MAINTENANCE

- Now is the time to drain your your pool water. Yes, that water of yours has to go. Oh come one my dear, it's been a month. Chemicals can only do so much. A monthly water replacement is for your family's safety. Draining your pool will probably take about 2 days. Be patient. It's the PROTOCOL.

- Pick up all leftover grime and grub with a shovel and dispose of it. Leave nothing behind. NO MERCY!

- Acid wash your pool with quality muriatic acid. Just remember to wear your safety gear before you do this ok? Your safety gear consists of a gas mask, strong rubber gloves and goggles. Do not be all macho and wear nothing. Muriatic acid is a strong substance. You want to be safe than sorry believe me.

- Clean your pool accessories and apparatuses.

What did you miss out? Well, it's ok. Just make it up. And you better print out this instructions so you won't have to miss out on a step. Remember, a clean pool makes a pool owner happy and safe. Hey, that should be your new motto!

To better educate ourselves in important energy facts, we must first have a better understanding of energy itself.

The laws of Newtonian physics define energy as the ability to perform work.  There are many types of energy in this universe.  Our human civilization primarily depends on thermal, mechanical, and electrical energy to power our infrastructure, our machines, and our electronics.   

Producing electrical energy has its challenges, both in terms of cost and environmental impact.  There are renewable energy sources such as solar energy, wind energy, geothermal energy, and hydroelectric power.  Then there are the non renewable energy sources such as fossil fuels and nuclear energy that are more prevalent and cost effective in the eyes of many.  

It is a well known energy fact that competition for non renewable energy sources often leads to war.  Negative environmental impact also occurs from the burning of fossil fuels and the dumping of radioactive nuclear wastes.  

While many of you already know that 70 percent of electricity in the United States is generated from fossil fuels and nuclear power, what many of you do not know is that no more than 48 percent of that fossil fuel is ever converted to actual electrical power.  The rest becomes thermal energy and is completely wasted.

Another interesting energy fact is we produce at least half of all our electricity by burning coal.  Coal is the most notorious producer of greenhouse gases.

It is also been said that 30 percent of all electricity used in commercial buildings is totally wasted.  If we only reduced this waste by 10 percent, it would be like taking 30 million cars off of the street.  

A little known fact pertaining to energy consumption in the home is that 25 percent of all electricity is used for lighting.  Replacing just 25 percent of your incandescent bulbs with fluorescents will reduce your power bill by 25 percent.  

A little known energy fact about home refrigerators will shock you.  The power consumed by all refrigerators in the US equals the power produced by 25 large power plants in a year.  

If every American turned down the water heater 10 degrees, this would eliminate 45 million tons of C02 emissions per year.

Computer monitors that are left running overnight account for 9 million tons of C02 emissions every year.

Hot water consumes 80 percent of all the energy used in washing clothes.  Warm and cold water will do just as good a job, so conserve.

Approximately 43 percent of the total cost of electricity in every home is invested in heating and cooling costs.  Air leaks around doors and windows cost people money they do not even know they are losing.  Replacing old Bottled Loading Water Dispenser Manufacturers caulking and weather stripping will immediately reduce the bill by 10 percent at least.

Another interesting energy fact you may not have heard yet pertains to electronic devices.  Even when they are off , they are not really off, but rather in standby.  They are still using miniscule amounts of power.   To truly turn these devices off and save this power, plug them into a power strip, and then turn off the power strip.

Water trough's have been around for centuries and have always been needed by ranchers, farmers and people who raise animals for pleasure. People have been making improvements to water troughs for as long as they have been around. With all the innovations that are introduced each year someone is going to apply some of these innovations to water troughs. The automatic livestock waterer's are the next step in providing the best solutions for the inherent problems that are associated with water troughs.

The health of the animals has always been a major concern and there is always room for a product that will help with the overall health of the livestock. One consistent area is providing fresh clean water that is free of mosquito larva, algae and dead animals in the water. Galvanized metals have always been one of the easiest surfaces to clean and sanitize, but with the designs of so many trough's makes it difficult to keep the water safe and clean. Having the water constantly needing to be cleaned of dead animals or mosquito larva has always been time consuming.  The metal water trough will start to get beat up after years of use and too many times sharp edges are formed and then animals start to get cuts or scrapes from these damaged areas. The water troughs are sometimes not the right height for some of the larger animals and the lower designed troughs can be a hazard to horses or bison. There are times when the larger animals may step in the trough while watering and injure their legs.

Many of the designs for automatic waterer take in account for many of these hazards and have several different ideas on how to fix them. Several of the products are combining the durability of synthetic material (usually polyethylene) for the outside base of the waterer. Some models will be insulated, or have heaters along with other features incorporated in the body. This material usually is smooth with rounded corners and even after years of being kicked, it is usually not damage and has no sharp edges forming like metal will sometimes. The reservoir is then made out of stainless steel or some other metal that is easy to clean. The reservoir is usually easy to remove so that it can be cleaned and sanitized away from the water area to help keep the animals from possibly getting sick from the cleaning solutions. One style that can be used in a pen or pasture is shaped like a large cone. The opening is large enough for several head to water at the same time and has underground water pipes that seem to keep the water supply consistent. It has a quick drain plug and even though it is completely made out of synthetic material, it appears large enough to be able to be thoroughly cleaned periodically. Another style looks like a pipe coming out of the ground; the animal puts it's snout in the reservoir and that releases a lever that allows water to flow freely for the animal to drink. It requires very little maintenance since the water drains out once the animal is done drinking so there is no Water Dispensers Manufacturers standing water to worry about. The one draw back is, you can only water one animal at a time.

These waterer's also have smaller units that are used in a stall or pen and it has a fitting that you can used a hose or run a water line to it. This unit has a float that keeps the water level at a predetermined setting and it is easily taken apart for cleaning.  Like all of the automatic waterer they do not transfer very well. When you run a underground water line it makes that site a permanent site so they can not be transported from one area to another, which is one negative area they are going to have to work on.

Because each water filtration technology removes a certain types of contaminants, none can be relied upon to remove all contaminants.  A quality water purification system uses a combination of purification and filtration technologies to achieve the highest water quality. There are quality water filtration/purification systems available that utilize a combination of contaminant removing technologies. Below is a list of common types of water filtration systems that are available as a single system or in combination with other technologies: 

Ion Exchange: With ion exchange technology, ions in the water are exchanged for other ions. The most common ion exchange for drinking water Wholesale Desktop Water Dispensers Suppliers systems is a process called deionization.  The ion exchange process filters water through bead-type spherical resin materials. Ions in the water are exchanged for other ions that are fixed to the beads. Deionization beads exchange either hydroxyl ions for anions or hydrogen ions for cations. The cation exchange resins exchange a hydrogen ion for such cations as Al+++, Na+, and Ca++.  The anion exchange resins will exchange a hydroxyl ion for anions such as Cl-. The hydrogen ion from the cation exchanger will join with the hydroxyl ion of the anion exchanger to create purified drinking water. Deionization systems remove ions, but they do not effectively remove most organics or microorganisms. When used in combination with other methods such as carbon adsorption, Deionization is an effective water purification system.  

Carbon Adsorption: Carbon absorption is common method used in home eater filtration. Activated carbon is effective removing odors and improving the taste of the water. It removes chlorine as well as many gases and chemicals.  However, it is not effective at removing harness, dissolved solids, and heavy metals. Normally it will not affect total dissolved solids, hardness, or heavy metals. Two types of carbon filter systems are solid block carbon and granular activated carbon.  Carbon is normally used in combination with another filtration/purification treatment process.

Reverse Osmosis: Reverse osmosis is an effective and cost-efficient method of removing 90% to 99% of all contaminants. The pore composition of reverse osmosis membranes is much tighter making them capable of eliminating basically all organics, particles, and bacteria. Water bottling companies tend to use reverse osmosis technology. The process of osmosis will take place when two different concentrations in solutions are divided by a semi-permeable membrane. Osmotic pressure forces the water through the membrane and the water dilutes the more concentrated solution. Pure water is forced from the concentrated solution. Reverse osmosis removes a number of impurities from the water such as asbestos, total dissolved solids (TDS), many dissolved organics, chlorinated pesticides, radium, lead and other toxic heavy metals. The process of activated carbon filtration and reverse osmosis are often combined in a water cleansing system to purify tap water.

Ultraviolet (UV) Radiation: This method has been used as a germicidal treatment for water as it is effective at sanitizing water. The adsorption of UV light by the DNA and proteins in the microbial cell results in the inactivation of the microorganism. 

To ensure the quality and safety of your drinking water, a quality water filtration system is needed. It will provide you and your family with clean, great tasting, and healthy drinking water.

The humble hot water bottle is enjoying a spectacular comeback, as more and more people are looking for more environmentally friendly and cost-effective ways to stay warm during the colder months. With so many new hot water bottle products on the market, deciding which product is right for you can be a bit overwhelming. Here are some features and benefits of both traditional hot water bottles and newer microwave bottles to help you decide which may be right for you.

Traditional hot water bottles are tested and true. Since their introduction on the market in 1903, rubber hot water bottles have been used by individuals, hospitals, and other organizations to keep people comfortable and warm during cold nights. Traditional hot water bottles are simple to use and don't require any special equipment. Filled with hot water and sealed shut, they stay warm for a long time. Newer models come in a variety of designs, prints, and colors. Novelty covers are also available in hundreds of designs, and can be changed to suit the Wholesale Desktop Water Dispensers Suppliers season or the user.

Traditional hot water bottles are perfect for someone looking for the most environmentally friendly and cost-effective product. Unlike microwave bottles, hot water bottles only need hot water to be effective. This also makes them ideal for someone who needs a hot water bottle for camping or other outdoor activity where electricity may not be available.

The disadvantage to these types of bottles is that they are prone to cracking over time, and must be inspected regularly to ensure the rubber is not breaking down. The must be drained, dried, and stored properly to maintain effectiveness. Additionally, hot water bottles are not built to withstand strong pressure, and may leak or explode if squeezed too tightly. For this reason, they cannot be left in bed while a person sleeps, and must be removed. This can limit their effectiveness by requiring the removal of the hot water bottle before it has cooled completely.

Microwave bottles are similar in shape to hot water bottles, but work much differently. Instead of needing to be filled with water, microwave bottles have a core that heats up in the microwave, providing warmth for hours after heating. Microwave bottles are covered in a soft plush fabric, and are available in a variety of colors and fabrics. Unlike hot water bottles, the covers are not removable and cannot be changed.

The advantage of microwave water bottles is that they are not prone to leaks or explosions from undue pressure and can stay in bed overnight, allowing the user to enjoy the maximum benefit of the product. This also makes the product safer for use with children, who are not always as careful as adults. Microwave bottles can be cleaned with a damp cloth to keep them free from dirt and germs, and don't suffer from the same tendency to crack or dry out as regular hot water bottles do.

The disadvantage to these types of bottles is that they are not suitable for use outside of the home or hotel due to the need for access to a microwave. Campers, outdoorsmen, or even someone looking to take a hot water bottle to an outdoor sporting event may prefer the convenience of a traditional hot water bottle that can be filled and used almost anywhere hot water can be found.

We humans need to drink a fair amount of water everyday in order to stay healthy. Thirst should tell us how much pure water we need. However, the thirst mechanism has usually been distorted by the taste of coffee, soft drinks etc. and the 'busyness' of our lives, where we don't even notice the desire for water. Water needs vary greatly. We require much more when physically active in summer than when we sit indoors in winter. A concentrated diet generates greater need for water than a lot of fruit and salads. Eight glasses a day of pure water may be fine on an average day.at times this may be excessive, but at other times, like on hot dry days when we are active, we may require much more.

Take fluid at least 30 minutes before a meal or after the stomach has emptied of food, which typically takes two to four hours.It's better to avoid drinking with meals, as it interferes with the digestion process.

Our bodies contain about 60% to 70% water, It is the medium for most of the chemical changes in the body that are the basis of life. Without enough water we become dehydrated and often we don't realize it.

Dehydration producing as little as 1% decrease in body weight has significant effects, according to Health Science magazine. Early signs include China Wholesale RO Water Dispensers Manufacturers headache, fatigue, loss of appetite, flushed skin, heat intolerance, light headedness, dry mouth and eyes, burning sensation in the stomach and dark urine with a strong odor.

With mild dehydration there may be impaired physical and mental performance, less saliva, heart problems and an increased risk of certain cancers.-

Because of the volume we need to consume, purity is essential. We have to ensure that the town water we drink is free from chloride, fluoride, heavy metals, aluminum and pesticides, which are the most harmful substances in our water supply. There may also be traces of other nasties in it, including pesticides. Some of the chlorine breaks down to form traces of chloroform, which was once used as an anaestetic, until it was discovered that it causes cancer of the liver and kidneys. The US Council of Environmental Quality has estimated that the general cancer risk is doubled by drinking chlorinated water.

Fluoride in drinking water also causes harmful effects on the body, including bone strength, thyroid issues, brain development in children and is an enzyme poison. The chemical used to fluoride your water is hexa fluorosillicic, a waste product of the fertilizer manufacturing industry. Since 1990 over 280 communities around the world have rejected water fluoridation and are now fluoride free. Western Australia is trying to get fluoride out of the water supply for years, without getting any approval from the Government. It is very hard or almost impossible to filter fluoride out of the tap water, even with a high quality reversed osmosis filter!

Aluminum is added in the form of alum to cause sidements to flocculate and settle out. Because of the persistent link between aluminum and Alzheimer's disease, it's use around the world is declining, and Sydney Water and other state authorities are no longer using it. Earthworks can cause aluminum to leach out of clay and enter the water supply, as has been the case with Sydney's Warragamba Dam.

Long hot showers generate so much chloroform so that a person can inhale just as much during a 10-minute shower as by drinking two litres of chlorinated water. Indoor swimming pools, especially if they are heated, may expose swimmers to high levels of chloroform, as there is no wind to blow the gases away.

For showering, install a shower filter device. If used with a AAA-rated shower head (restricts flow to less than 9 liters/minute), you will save hot water that will easily pay for the cost of the filter.

If there is no shower filter, ensure the bathroom window is wide open and use a fan if installed, for plenty of air circulation.